News

Are you ready to take your FPV experience to the next level? We have an unbeatable offer for you! Introducing...

    Text version: Welcome to the tutorial for using the 4K Moonlight Camera + Video Board. This product is compatible with all Walksnail Avatar series VTXs. To connect the 4K recording board and the Avatar VTX, you will need a USB cable. There are three types of USB cables included in the package. Each corresponds to different VTX modules. We will use the Avatar V2 VTX as an example here. Insert the USB cable into the VTX, with the white-marked end near the VTX antenna. Insert the other end into the 4K recording board. Remove the VTX's camera. Attach the 25mm coaxial cable from the 4K recording board to the Avatar V2 VTX. Solder the power cable from the 4K recording board to the flight controller. The input voltage should be between 7.4V and 25.2V. You can use a voltage-regulated BEC or BAT power soldering point....

From May 24th to 26th,The 9th World Drone Congress 2024 was held over a span of three days, culminating in...

Preface： With the rapid development and continuous growth of the FPV industry, the team at CaddxFPV has successfully launched a...

From the inception of CADDXFPV, we have always believed that everyone should have the freedom to soar the skies. While...

Recently, we've noticed that some of our users are having problems with their goggles overheating. First of all, we feel...

As we prepare to enter 2024, CADDXFPV would like to express my gratitude for the continued support and attention from our...

Q:The goggles version is different from the VTX. Is it safe to fly with stock firmware on new goggles?A:Of course,...

We are thrilled to share all the exciting updates and offers that took place during this special month. As always,...